Keyword:
Mixing & Compounding , Rubber Materials

Description:
Module 1: Introduction to Non-Tyre Products Industry
Module 2: General Purpose Rubbers
Module 3: Special Purpose Rubbers (EPDM, NBR, CR, CPE, CSM, ACM, AEM)
Module 4: Special Purpose Rubbers (HNBR, FKM, ECO, VMQ, FQM, PU)
Module 5: Fillers for Rubber Reinforcement
Module 6: Rubber Processing Additives
Module 7: Rubber Vulcanization Chemicals & Protective Agents
Module 8: Reinforcing Materials (Textiles & Steel) for Rubber Industries
Module 9: Rubber Process Oils: Types & Selection
Module 10: Rubber Compound Formulation: Development & Case Studies
Module 11: Molded Rubber Products: Compound Development
Module 12: Hydraulic Hoses: Rubber Compound Development
Module 13: Conveyor Belts: Rubber Compound Development
Module 14: Rubber Mixing Technology & Selection
Module 15: Rubber Mixing Procedures & Sequence
Module 16: Cost Analysis of Rubber Compound
Module 17: Extruded Rubber Products: Compound Development
Module 18: Industrial Rubber Rollers: Compound Development
Module 19: Rubber Mixing Plant Management
Module 20: Reverse Engineering in Compound Development
Module 21: Footwear Soles: Rubber Compound Development
Module 22: Cost Optimization of Rubber Hose Compounds
Module 23: Best Practices for Rubber Chemists in Material Development
Module 24: Laboratory Management System
Module 25: Setting-up Rubber Mixing Line
Module 26: Rubber Mixing Troubleshooting
Module 27: Metal to Rubber Bonded Products: Compound Development
Module 28: Rubber Reclaim Application in Non-Tyre Products
Module 29: Safety & Environmental Regulations for Rubber & Tyre Industries
Module 30: Storage of Raw Materials & Rubber Compounds
Module 31: How to Judge Quality of Rubber Compounds?
Module 32: Elastomer Curing Systems and Their Effects on Product Performance
Module 33: Dispersion and Distribution Principles in Rubber Compounding
Module 34: Fill-Factor & Batch Weight of Internal Mixer
Module 35: Rubber Testing Principles
Module 36: Technical Discussion (Part 1): Rubber Compounding for Non-Tyre Products
Module 37: Technical Discussion (Part 2): Rubber Compounding for Non-Tyre Products
Module 38: Technical Discussion (Part 3): Rubber Compounding for Non-Tyre Products
Module 39: Technical Discussion (Part 4): Rubber Compounding for Non-Tyre Products
Module 40: Technical Discussion (Part 5): Rubber Compounding for Non-Tyre Products
Module 41: Rheology and Rheological Effects in Rubber Compounds
Module 42: Technical Discussion (Part 6): Rubber Compounding for Non-Tyre Products
Module 43: Technical Discussion (Part 7): Rubber Compounding for Non-Tyre Products
Module 44: Technical Discussion (Part 8): Rubber Compounding for Non-Tyre Products
Module 45: Technical Discussion (Part 9): Rubber Compounding for Non-Tyre Products
Module 46: Rubber Process Analyzer (RPA): How to Use it Efficiently?
Module 47: Rubber Compound Properties & Final Product Quality: Correlations


Live Webinar Held: 08 November 2021 (Monday)

Expert:

Keyword:
Mixing & Compounding , Raw Materials & Chemicals, Rubber Materials

Description:
This webinar is centered around basic fundamentals on plasticizing effects and practical explanations. It provides up-dated concepts and application-oriented advice about the effects on flow properties, low temperature flexibility, the impact on vulcanization, the physical properties of filled vulcanizates and the contribution to vulcanization fumes. A special focus will be put on the effects of different grades of mineral oils and synthetic plasticizers on compound properties.

Live Webinar Held: 05 October 2021 (Tuesday)

Expert:
# Rubber & Tyre Industry Consultant
# Former Director of Germany Rubber Institute (DIK)
# Specialization: Mixing, Processing, Vulcanization, Rubber -filler interaction, nanocomposites, recycling etc.
# 45+ years in Rubber Technology Research & Consulting
# Received “Carl Harries” Medal from the German Rubber Society (DKG)
# Received the “Melvin Mooney” Award from ACS Rubber Vision
# 300+ published papers & Supervised 70 Ph.D Students

Keyword:
Mixing & Compounding , Raw Materials & Chemicals, Rubber Extrusion, Rubber Materials

Description:
Module 1 : EPDM Rubber Industry: Market, Supply Chain & Competencies
Module 2 : EPDM Rubber Chemistry & Properties
Module 3 : EPDM Rubber Compounding
Module 4 : EPDM Rubber Processing
Module 5 : EPDM Rubber in Foam Products
Module 6 : EPDM Rubber in Automotive
Module 7 : EPDM Rubber in Construction & Industrial Goods
Module 8 : EPDM Rubber in Tyres & Tubes
Module 9 : Troubleshooting of EPDM Rubber Processing
Module 10 : Q & A with Expert (Part 1) : EPDM Rubber Technology

Live Webinar Held: 07 December 2021 (Tuesday)

Expert:
Eric Jourdain is a well-experienced specialist in EPDM, TPV, TPE, Butyl and Automotive Rubber Products. He worked for 40 years at ExxonMobil in various positions (Technical, R &D and Marketing) with business focus on synthetic rubber (EPDM, TPV, Butyl) in Technology, Development and Application.

Keyword:
Mixing & Compounding , Rubber Materials, Tyre Technology

Description:
Program Content: # Aircraft Tire Types; Terminology; #Performance Challenges; # Materials Technologies (Retreading, Tread Wear, Innerliner, Sidewall); #Compound Formulations

Live Webinar Held: 04 November 2021 (Thursday)

Expert:
Brendan Rodgers, based in Austin Texas, has spent 42 years working in the tire and rubber industry with both The Goodyear Tire & Rubber Company and ExxonMobil. He has worked on a broad range of tire and industrial rubber products including hydraulic hose and conveyor belts, materials technology, and product design. He has had work assignments here in the United States, China, Ireland, Italy, and Luxembourg, working on original equipment automobile tires, truck tires, industrial rubber products, and new tire materials technologies. He is the originator of a broad range of patents in tire and rubber technology and many industry publications including editor of the text, Rubber Compounding, Chemistry and Applications, and the text, Tire Engineering, both published by CRC Press. Brendan has a PhD in chemical engineering from The Queen’s University of Belfast in Northern Ireland, where he studied thermodynamics, heat transfer through large rubber sections, and vulcanization kinetics. He has a Master's degree in Polymer Technology also from The Queen’s University, and a BSc in Biological Chemistry from The University of Ulster.

Keyword:
Mixing & Compounding , Raw Materials & Chemicals, Rubber Materials

Description:


Live Webinar Held: 04 October 2021 (Monday)

Expert:
# Rubber & Tyre Industry Consultant
# Former Director of Germany Rubber Institute (DIK)
# Specialization: Mixing, Processing, Vulcanization, Rubber -filler interaction, nanocomposites, recycling etc.
# 45+ years in Rubber Technology Research & Consulting
# Received “Carl Harries” Medal from the German Rubber Society (DKG)
# Received the “Melvin Mooney” Award from ACS Rubber Vision
# 300+ published papers & Supervised 70 Ph.D Students